Table of Contents
Advertisement
CHANNEL VST ENCODER
VST Encoder Priority
If a higher priority assignment action occurs, VST encoder functions change immediately to this mapping.
The priority order of the possible assignment actions is:
Priority Function
highest
CHANNEL EXPANDED FUNCTION (e.g.: EQ, Dynamics, etc)
FOLLOW OUTPUT SOLO
FAST ASSIGN
lowest
Channel Encoder Function (see previous page)
HINT: If any touch field is activated, the 16 VST encoders are assigned with expanded channel
function parameters (see Chapter 4 for full details).
Changing Encoder Function
The function assigned to the VST encoders can be changed by the user via the Vistonics Mode panel.
The two [FAST ASSN] keys provide a very fast way to temporarily assign a bus function to a VST encoder
row. Press and hold one of the [FAST ASSN] keys, then press one of the Output Masters' [SOLO/SEL] keys
( there will be no influence on audio, the Output solo is not activated). The relevant row of VST encoders
will now be assigned to that Output master, and the [FAST ASSN] key in question will illuminate.
Hint: Only Output Masters which are configured as Auxes use the encoders. Group Masters do,
however, use the VST button next to the encoder.
HINT: Fast assign mapping is removed by pressing/releasing [FAST ASSN]. Fast assign always
works GLOBALLY for all input strips
Soundcraft Vi1™ User Guide Issue 0810
Page 7 - 3
Advertisement
Table of Contents
