Table of Contents
Advertisement
L,R & C Master Processing
This page is accessed by pressing the [SEL] key which is located below the L, R & C master faders.
The Master processing fields are shown in the Meter Area of the Master Screen.
In order to change the parameters for EQ, Dynamics or Pan, the appropriate area on the touch-screen
must be pressed.
Note: When selecting the PAN area, the page which will be displayed will be similar to the
screenshot on page 5-10 except that the PAN, MASTER LR and MASTER C fields will not be
present.
Note: The output levels of the L R & C Master outputs are always controlled by their dedicated
faders.
Soundcraft Vi1™ User Guide Issue 0810
Page 5 - 3
Advertisement
Table of Contents
