Table of Contents
Advertisement
MASTER EQ LINKING
The LRC Master busses can have their Parametric and/or Graphic Equaliser sections linked for easier
adjustment. Left and Right busses can be linked, or the Centre bus can be added to the linked L&R so that
all three busses can be adjusted together. It is not possible to link Left and Centre or Right and Centre.
The linked state is indicated at all times by a pair of white 'gear wheel' icons between the L and R
Parametric and Graphic EQ touch fields.
A similar icon with 3 'gear wheels' indicates that the C bus is also linked.
To link or unlink the EQ or GEQ sections
.
Press [SEL] below the LRC Master faders to open the Masters strip display.
.
Press the {LINK SETUP} button in the bottom right corner of the Master strip display.
.
Touch either of the L or R {EQ} touch fields to toggle the linked state on and off for the EQ.
Touch the C {EQ} field to add/subtract the C bus EQ to the linked L/R pair.
.
Touch either of the L or R {GEQ} touch fields to toggle the linked state on and off for the GEQ.
Touch the C {GEQ} field to add/subtract the C bus GEQ to the linked L/R pair.
The fields that are available to be toggled in and out of the linked state are shown with a highlighted white
border around the touch field when {LINK SETUP} is active.
Note that the FX fields and the Dynamics fields of the L and R busses are permanently linked, and cannot
be toggled in the Link Setup mode.
Default settings
The settings of the EQ and GEQ Linking for the Master busses is stored in the current Show.
The links are set to ON for L,R and C busses for both EQ and GEQ, in the factory default Shows that are
supplied with the console.
Page 5 - 4
Soundcraft Vi1™ User Guide Isuue 0810
Advertisement
Table of Contents
