Table of Contents
Advertisement
Note that where the Message Type being selected has a Device ID rather than a MIDI Channel (which will
be the case only if the MSG Type is set to MMC Locate, SysEx or Go to Cue then the Device ID will be
displayed instead of the channel.
{FIRE} key: When pressed this transmits the displayed MIDI event for test purposes during equipment
setup. Only the currently-selected event from the list of 20 is transmitted.
SCROLL CUE LIST encoder: Allows the Cue list to be scrolled whilst the EDIT MIDI page is open, allowing
the Events Setup to be compared between Cues.
Default settings stored in current Show are (for each of the 20 Events):
On key = OFF
Channel = 'No device'
Message Type= blank
Value 1&2 = blank
Page 15 - 18
Soundcraft Vi1™ User Guide Issue 0810
Advertisement
Table of Contents
