Table of Contents
Advertisement
MONITOR SETUP PAGE
SOLO Section
Input
<PFL>
Sets the input channel solo mode to PFL.
<AFL>
Sets the input channel solo mode to AFL.
<AUTO> (default)
Sets the input channel solo mode automatically, as follows. If one Input SOLO is active the mode is PFL, if
more than one Input SOLO is active at the same time the mode is AFL. (Press and hold the first input solo
key to then select additional solos.)
Output
<PFL>
Sets the Output SOLO mode to PFL.
<AFL> (default)
Sets the Output SOLO mode to AFL.
Miscellaneous
<SIP>
Activates the SOLO-IN-PLACE mode. This is a destructive mode for use only during soundchecks or
rehearsals. When a channel is soloed in SIP mode, all other channels are muted, so that only the soloed
channel is heard, in its stereo position, at the console's mix outputs.
<MUTE SAFE>
Enables the Mute Safe (SIP isolation) configuration mode. If <Mute safe> is active the Mute safe state from
the Input channels can be toggled with the Channel's SEL Key. The state for a given channel is indicated by
that channel's Mute Safe LED. This configuration mode is disabled when the setup page is exited.
<MON SETUP>
Enters the monitor setup sub-page. (see page 11-8)
Page 11 - 4
Soundcraft Vi1™ User Guide Issue 0810
Advertisement
Table of Contents
