Front Panel Display And Controls; Setup; Data Socket; Store - SoundCraft Vi1 User Manual

FRONT PANEL DISPLAY AND CONTROLS

The Cues of the currently-loaded show are displayed in the Cue List displayed on the upper right part of
the screen. The Show's title is also displayed.
Cue List
The Snapshot/Cue keys are used as described below.

SETUP

The [SETUP] key causes the Setup page to be displayed on the master screen, see page 15-4.
DATA Socket (on main panel)
This accepts a USB data storage device.

STORE

Pressing [STORE] will record the console's current settings into a new cue.

UNDO

Pressing [UNDO] will undo the effect of pressing [RECALL], [NEXT] or [LAST]. It is useful if any of these 3
keys get pressed by mistake, and if the console's previous settings, which will get overwritten, are needed
and have not yet been recorded into a cue.

PREV MODE

Press the [PREV MODE] key puts the encoder into Preview mode.
In this mode, cues can be recalled to the console surface, but without affecting any audio settings. See
page 15-15 for more details.
Page 15 - 2 Soundcraft Vi1™ User Guide Issue 0810