Table of Contents
Advertisement
TB Send Section
This section allows the console operator to route the TB mic signal to various outputs of the Soundcraft
Vi1™.
TB Source Field
Displays the source name. If nothing is selected the console's TB mic XLR is automatically selected. Its
{VST config button} opens the TB source patch configuration page.
HINT: Sources can be the internal TB Microphone or any Microphone Input from the Soundcraft Vi1™.
Select <NONE> to select the console's TB microphone XLR socket.
Ext
The {VST config button} opens the patch configuration page (see Figure 12-6). This allows the user to
select which output will be used when the [EXT] key on the front panel is selected.
Page 12 - 4
Soundcraft Vi1™ User Guide Issue 0810
Advertisement
Table of Contents
