Table of Contents
Advertisement
from Chan 16 to Chan 1 in the case of RX, (or from OUT1:1 to OUT1:16 in the case of TX). This is of
particular value in the case of the Device ID list, which has a values range from 0 to 127 (127 is displayed
as ALL and cannot have its name edited).
Global VST encoders
These encoders are not related to the above Channel Lists. They are located immediately below the lists in
order to keep the space on the left clear for future additions.
MIDI IN:
The blue area of the screen controls parameters relating to MIDI input.
ON button: works as a global enable buttons for the MIDI IN – when this button is off, no reception is
possible from the MIDI IN.
GLOBAL RX CHAN VST encoder:
Sets the Global Receive MIDI Channel for the console. This channel can be referenced by the Cue List MIDI
RX Channel parameter.
The Global receive channel may also be used in the future for functionality where the console needs to
receive MIDI messages that are not associated with the Cue List triggering.
The value set here can nevertheless be selected from within the Cue List MIDI page as one of the available
receive channels.
Values range : Off, 1-16, Omni.
Default value: Omni
GLOBAL RX DEVICE ID VST encoder : Sets the Global Receive MID Device ID for the console.
This Device ID can be selected in the Cue List MIDI In page as one of the Device IDs for the MSC 'Goto
Cue' trigger messages.
This may also be used in the future to allow a Device ID to be set for the console in case MMC or MSC
commands need to be received by the console in future functionality which is not associated with
triggering Cues.
Values range : Off, 0-127.
Default value : 127
GLOBAL TIMECODE On/Off VST encoder: Enables or disables the reception of MIDI Timecode. The MIDI
Timecode can be set as a trigger for Cues, but if this parameter is set to Off, it will not be possible to recall
any Cues with MTC, even if the individual Timecode On/Off switches in each Cue are set to On.
GLOBAL TIMECODE FRAME RATE VST encoder: Allows the frame rate for the internally set values for
transmitted and received MIDI Timecode to be set. The frame rate of the incoming timecode timecode for
cue triggering is automatically detected.
The frame rate parameter only affects the Frames parameter values range of any Timecode entry fields on
the desk (ie: EDIT Cue Number field touched, and EDIT MIDI field touched and a MMC Locate TX event set
up).
Values range : discrete values of 24, 25, 30 fps.
Default value : 25
TC Display {ON} key. When switched on, the incoming MIDI timecode value and its automatically detected
frame rate is displayed instead of the show name on the main page in the control bay screen.
MIDI OUT:
The red area of the screen controls parameters relating to MIDI output.
Page 21 - 2
(Omni mode means receiving on all channels).
Soundcraft Vi1™ User Guide Issue 0810
Advertisement
Table of Contents
