Master Insert - SoundCraft Vi1 User Manual

Aux Master Insert
This operation mode is an elegant way to use Reverb Effects without loosing Input Channels for the Return
signals.
In this Mode the FX processor is inserted in an AUX Master, and the AUX Master is assigned to the Main
Master (LR).
The Input Gain of the FX can be
adjusted with the Insert Send
TRIM control and the effect
amount can be adjusted with
the Master Fader
HINT
You can use the AUX Master like an FX Return, because it has EQ and Dynamics that can be
used on the output from the FX Units. (You must set the Insert Point to pre processing.)
Inserting an FX processor in an AUX Master Bus
Press the [BUSSES 1-16] or [BUSSES 17-24] key.
Press the <PAN> area on the required AUX Bus.
Press the {INSERT} key to open the Insert Pool select page.
Pressing the <FX> button opens the FX selection options.
Select the desired FX processor. If the processor is in use, a dialog asks if you want to move it from
its current location.
Page 20 - 6
AUX
Soundcraft Vi1™ User Guide Issue 0810
FX

Master insert

To LR