HI CUT field
Encoder adjusts the High cut frequency in the range 1k to 20kHz.
{IN} switches the Hi Cut filter in and out.
FORMAT field
If the Channel is paired, the Encoder adjusts the Stereo format, which can be:
LR / RL / LL / RR / MONO.
If the channel is not paired, this field is not displayed.
PAIRING field
If the Channel is paired the label of the paired channel is visible.
{Its VST config button} enters the pairing configuration.
PHANTOM field
{48V} enables the Phantom Power (+ 48 V) for the XLR patched to this input.
PHASE field
{INV} inverts the phase of this channel (180 Degrees).
IN1 PATCH field
Displays the source name that is patched to IN1.
{Its VST config button} opens the IN1 patch page (see chapter 10).
IN2 PATCH field
Displays the Source name that is patched to IN2.
{Its VST config button} opens the IN2 patch page (see chapter 10).
CH Label field
Displays the channel label.
{Its VST config button} opens the channel label configuration page (on-screen keyboard).
DLY field
Encoder changes the input delay in the range 0.. 100 mS.
{IN} enables the delay function.
DLY FIN field
This allows fine adjustment of the input delay in steps of 0.02mS
Soundcraft Vi1™ User Guide 0810
Page 4 - 5