SoundCraft VI 4 Field Manual

Hide thumbs Also See for VI 4:

Download this manual See also: Technical Information, User Manual

Master Fader

SEL Select Buttons

Selected Channel

Snapshot Recall

Encoder Mode

Copy & Paste

Menu Button

How to Label the desk.

• Select Channel by pressing SOLO/SEL button

• Press the top section of the screen for the channel you

wish to label

• Press the button below CH LABEL this will bring up a on

screen keyboard

• Long Label refers to the name on screen (ten characters

max)

• Short Label refers to the name on the LCD scribble strip

(six characters max)

Setting Gain / Phantom Power

• Select channel

• Press the top section of the screen (of the channel you

wish to route)

• Turn the encoder labeled GAIN to adjust the gain

• To turn Phantom Power on press the button below +48v

• In this window you can also set the HPF and LPF as well

as pairing channels

Soundcraft Vi4 Field Manual

Routing

To route to MAIN LEFT & RIGHT

• Select Channel

• Press the bottom section of the screen (of the channel you

wish to route) to open the routing pop up

• Make sure MASTER LR is switched on if it is not press the

button below it.

Page 1 Soundcraft Vi4 Field Manual Master Fader SEL Select Buttons Selected Channel Snapshot Recall Encoder Mode Copy & Paste Menu Button How to Label the desk. • Select Channel by pressing SOLO/SEL button • Press the top section of the screen for the channel you wish to label •...
Page 2 Adding EQ • Select Channel • Press the second box down on the channel you wish to change the EQ on • Use the encoders to change the EQ parameters • To Flatten the EQ press and hold FLAT ALL •...
Page 3 Adding Effects • To add effects select the aux send you wish to feed the effects unit with • Press on the ﬁfth box to open the routing pop up • Press the button below BUS OUT • Select LEXICON IN from the list on the right •...