Panning; General; Pan Function Lr Mode - SoundCraft Vi1 User Manual

PANNING

General

This page contains the output functions of the input channel. This contains the panning, the routing to the
masters, the insert point and the direct out function. The Pan can work in LR or in LCR mode. In LCR mode
an additional width function is available.

PAN Function LR Mode

PAN Field
Encoder sets the channel pan to the masters. If the channel is paired, the balance can be adjusted.
See Audio Format / Pan / Panning, on pages 4-17 & 4-18.
MASTER LR
{ON} routes the channel signal to the Left and Right master busses.
MASTER C
{ON} routes the channel signal to the Centre master bus.
MODE
Switches the pan mode between LR or LCR. This field is not available for stereo-paired inputs.
Page 4 - 14 Soundcraft Vi1™ User Guide 0810