SoundCraft Vi1 User Manual page 199

Press one of the Fixed Fader Pages [A], [B], [C] or [D} keys to select the required bank of input
channels.
Press the <INPUT> area on the desired return Input Channel.
Press {IN1 PATCH} to open the Input Patch page (see Figure 21-13). Press <Lexicon Out> to open
the FX selection options.
Select the desired FX processor. If the processor is in use, a dialog asks if you want to move it from
its current location. Press <EXIT>.
Soundcraft Vi1™ User Guide Issue 0810 Page 20 - 9