Table of Contents
Advertisement
Equaliser Band Highlight
If you adjust one or more parameter encoders, the corresponding Equaliser band(s) will be indicated by
the red overall graph being overwritten with a white graph that represents only the adjusted band(s). This
is useful for identifying which part of a curve is associated with which EQ bands. The representation will
return to the default when you leave the page.
BAND Field
FLAT ALL switch
The {FLAT ALL} resets all four bands GAIN parameters to 0dB. the switch has to be presses and held for 1
second to activate.
All four bands contain a GAIN, FREQ, Q encoder and an IN switch.
GAIN
Encoder adjusts the Gain in the range +/- 18 dB. {IN} enables the Equaliser band.
FREQ
Encoder adjusts the frequency in the range 20 Hz .. 20 kHz.
Q
Encoder adjusts the Q (Width) in the range 0.7 .. 15 only for BELL Mode.
IN Switch
{IN} enables this Equaliser band.
SHELF Switch
{SHELF} changes the response characteristic to SHELF. (12dB/oct) (HF/LF only)
EQUALISER Field
{IN} enables the full Equaliser section (without filters). For preparation, all Parameters including the band
IN switches can be set, even if the Equaliser is switched off.
Page 4 - 8
Soundcraft Vi1™ User Guide 0810
Advertisement
Table of Contents
