Load Iso With Show - SoundCraft Vi1 User Manual

LOAD ISO WITH SHOW

The {YES}/{NO} key (its legend toggles) enables the user to recall (or not) the new Global Filter settings
when a new Show is loaded.
The purpose of this feature is to allow ISO buttons to be used to protect sections of the console (e.g..
output section and master outputs) from changing when a new show is loaded in. This can be useful in a
multi-band situation where the desk outputs are set up for the PA system but a visiting engineer wants to
load their own show without changing the output section (or the interval music CD player for example).
Setting LOAD ISO WITH SHOW to NO, and then switching the required parts of the show to ISO, will allow
the show to be loaded without changing the isolated parts. The state of the key is not saved but defaults
to YES when the desk is powered up.
Soundcraft Vi1™ User Guide Issue 0810 Page 15 - 23