Table of Contents
Advertisement
DESK VIEW
SOLO TRIM
Trims the SOLO Level in the range +/- 10 dB. This control is SOLO context sensitive. It is possible to set a
different trim for each of the 32 Outputs in addition to a global input solo trim level.
SOLO BLEND
Adjusts the background level of the monitoring source signal which is audible when a solo is in operation
from OFF (-∝)(as normal consoles) to a –10dB dim. This allows solos to be heard within a mix which has
a reduced background level.
PHONES Volume
This encoder is permanently assigned to control the headphones volume level. The headphone output
socket is located under the armrest at the front of the console, and is designed for headphones with
impedances in the range 50-600 ohms.
SETUP
When this is pressed the Monitor Setup Page is displayed on the master screen. The setup key glows blue
when it is active.
Level Meter
The stereo Level Meter shows the level of the A or B outputs, depending upon the selection made via the
Monitor B switch. The meters follow the Monitor Volume Fader.
PFL/AFL Indication
These two LEDs show if an active solo is a PFL or an AFL.
Page 11 - 2
Soundcraft Vi1™ User Guide Issue 0810
Advertisement
Table of Contents
