Table of Contents
Advertisement
GPIO
CONFIGURATION
In the GPIO (General Purpose Input Output) Page you can configure all GPIO channels that are available
in the Soundcraft Vi1™ if the optional Vi6-type stagebox is fitted. To access the GPIO page, press the
[MENU] key, this opens the Main menu page on the master section screen, then touch the <GPIO> tab
(see also chapter 14).
The scrollable tables show the configuration of the GPIO channels. The configuration is done via the VST
fields. The selections made via the VST keys and encoders are reflected in the tables on the screen.
For each GPIO channel, the polarity, time (outputs only) and edge can be configured, to make it easy to
interface directly to different device types.
Screen Touch-Pads
<LOCAL I/O>
Selects the GPIO in the Console (FX Tap functions only).
<STAGE BOX>
Selects the GPIO in the Stage Box (8 GPIO).
Up and Down Arrows
The pair of Up and Down Arrows are used to scroll though the two lists. The currently-selected input and
output channels are outlined in yellow. GP Inputs are displayed in blue, and GP Outputs are displayed in
red.
GPI VST Keys & Encoders
GPI Field
The {ON} key enables the selected GPI function. GPIO Inputs are via opto-isolators.
Function Field
This field displays the Input function. Its encoder selects the function.
Parameter Field
This field displays the Parameter (e.g. Channel number). There is no parameter for TB INPUT. The encoder
adjusts the Parameter.
Soundcraft Vi1™ User Guide Issue 0810
Page 16 - 1
Advertisement
Table of Contents
