Insert Function; Direct Out Function - SoundCraft Vi1 User Manual

INSERT Function

INSERT Field
Displays the label of the selected insert from the pool.
{Its VST config button}opens the Insert Pool select page.
Refer to page 10-6 for details about setting-up the Insert Pool.
POINT Field
Displays the actual point where the Insert is placed in the channel.
Encoder changes the point between:
* Pre Processing (EQ&DYN)
* Pre Fader.
TRIM Field
Encoder trims the insert send level in the range +- 18 dB.
{IN} activates the Insert.

Direct Out Function

GAIN field
Encoder sets the Direct Output send level.
{ON} activates the Direct Output.
POINT Field
Displays the actual point in the channel's signal path from where the Direct Output is taken.
Encoder selects the point between:
* Pre Filter
* Pre Processing
* Pre Fader
* Post Fader.
PATCH Field
Displays the patched Output.
Its {VST config button} opens the Direct Output patch configuration page (see page 10-8).
Page 4 - 18 Soundcraft Vi1™ User Guide 0810