Output Bay Displays & Encoders - SoundCraft Si3 User Manual

OUTPUT BAY DISPLAYS & ENCODERS
The output bay provides a similar interface to the VCS on the input bays, except that the output section has
two rows of encoders and displays.
The data displayed by the output bay is selected via the UPPER ROW, LOWER ROW or BOTH ROWS banks of
switches.
In addition to displaying output bus data, the output bay can also display input channel data provided that an
appropriate selection from the UPPER ROW or LOWER ROW buttons has been made.
SEL SEL SEL SEL
PRE PRE
ON ON ON
PRE PRE
ON ON ON
Page 4 - 4
SEL SEL SEL SEL
PRE PRE PRE
ON ON ON
PRE PRE PRE
ON ON ON
BUS TO BUS TO
MATRIX MATRIX
SEL SEL SEL SEL
PRE PRE PRE
ON ON ON
PRE PRE PRE
ON ON ON
SEL SEL SEL SEL
PRE PRE PRE
ON ON ON
PRE PRE PRE
ON ON ON
Soundcraft® Si3 User Guide
PRE
PRE