Table of Contents
Advertisement
Soundcraft Vi1™ FEATURES AND SPECIFICATIONS
Audio Channels
Max number of simultaneous mixing channels
64 mono inputs into 27 mix busses.
Pairs of mono inputs can be linked to create stereo channels.
Insert points
24 insert send/return pairs can be configured (using available I/O) and assigned to any of the 64 inputs
or 27 output channels
Direct Outputs
All 32 input channels on the Vi1 can have direct outputs in addition to their internal bus
routing, assuming sufficient I/O is available (eg via 64ch optical MADI card, see below)
Busses
24 Grp/Aux/Matrix*, plus main LCR Mix and LR Solo busses.
* a maximum of 8 matrix outputs can be configured.
I/O Capability
The following I/O is available and can be patched to any channel input, direct output, bus output or insert
point as required:
Local Inputs
•
32 analogue mic/line inputs
•
1 Talkback Mic input (mounted on control surface)
•
2 pairs of AES/EBU inputs (=4 channels)
•
64ch MADI In via optical SC connectors via optional card
(Optional) Stagebox Inputs
•
32 analogue mic/line inputs (with remote gain control, PAD, 48V and pre-A-D 80Hz HPF)
Stagebox Outputs
•
32 analogue line outputs
Miscellaneous
GPIO facility
•
8 GPIO inputs and outputs on the stagebox (All outputs are relay contact closure)
MIDI
•
1 MIDI Input and 2 MIDI Outputs on rear of control surface.
Page 1 - 8
Soundcraft Vi1™ User Guide Issue 0810
Advertisement
Table of Contents
