D-Link xStack DES-3200 Series Reference Manual page 284

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
To enable SSH:
DES-3200-28:4#enable ssh
Command: enable ssh
Success.
DES-3200-28:4#
disable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To disable SSH:
DES-3200-28:4# disable ssh
Command: disable ssh
Success.
DES-3200-28:4#
config ssh authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SSH authentication mode by password:
Used to disable SSH.
disable ssh
This command is used to disable SSH on the Switch.
None.
Only Administrator-level users can issue this command.
Used to configure the SSH authentication mode setting.
config ssh authmode [password | publickey | hostbased] [enable |
disable]
This command is used to configure the SSH authentication mode for
users attempting to access the Switch.
password – This parameter may be chosen if the administrator
wishes to use a locally configured password for authentication on the
Switch.
publickey  This parameter may be chosen if the administrator
wishes to use a publickey configuration set on a SSH server, for
authentication.
hostbased  This parameter may be chosen if the administrator
wishes to use a host computer for authentication. This parameter is
intended for Linux users requiring SSH authentication techniques
and the host computer is running the Linux operating system with a
SSH program previously installed.
[enable | disable]  This allows users to enable or disable SSH
authentication on the Switch.
Only Administrator-level users can issue this command.
279