Mac-Based Access Control Commands - D-Link xStack DES-3200 Series Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
The MAC-based Access Control commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table:
Command
enable mac_based_access_control
disable mac_based_access_control
config mac_based_access_control
password
config mac_based_access_control
config mac_based_access_control
auth_failover
config mac_based_access_control
guest_vlan ports
config mac_based_access_control ports
create mac_based_access_control
delete mac_based_access_control
clear mac_based_access_control
auth_mac
create mac_based_access_control_local
mac
config mac_based_access_control_local
mac
delete mac_based_access_control_local
show mac_based_access_control
show mac_based_access_control_local
show mac_based_access_control
auth_state
config mac_based_access_control
max_users
config mac_based_access_control
authorization attributes
enable authorization attributes
disable authorization attributes
show authorization
config mac_based_access_control trap
state
MAC-
BASED
Parameters
<passwd 16>
method [local | radius]
[enable | disable]
<portlist>
[<portlist> | all] {state [enable | disable] | mode [port_based |
host_based] | aging_time [infinite | <min 1-1440>] | hold_time [infinite |
<sec 1-300>] | max_users [no_limit | <value 1-128>]} (1)
[guest_vlan <vlan_name 32>| guest_vlanid <vlanid 1-4094>]
[guest_vlan <vlan_name 32> | guest_vlanid < vlanid 1-4094>]
[ports [all | <portlist>] | mac_addr <macaddr>]
<macaddr> {[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
<macaddr> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> |
clear_vlan ]
[mac <macaddr> | vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
{ ports {<portlist> } }
{[mac<macaddr> | vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
{ports <portlist>}
[no_limit| <value 1-128>]
{ radius [ enable | disable ] | local [ enable | disable ] } (1)
[enable | disable]
414
A C
CCESS ONTROL
51
C
OMMANDS