D-Link xStack DES-3200 Series Reference Manual page 16

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
enable password encryption
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable password encryption on the Switch.
DES-3200-28:4#enable password encryption
Command: enable password encryption
Success.
DES-3200-28:4#
disable password encryption
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable password encryption on the Switch.
DES-3200-28:4#disable password encryption
Command: disable password encryption
Success.
DES-3200-28:4#
Used to enable password encryption on a user account.
enable password encryption
The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
None.
Only Administrator-level users can issue this command.
Used to disable password encryption on a user account.
disable password encryption
The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
None.
Only Administrator-level users can issue this command.
11