D-Link xStack DES-3200 Series Reference Manual page 223

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
config access_profile
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the access profile with the profile ID of 1 to filter frames on port 7 that have IP addresses in the range between
10.42.73.0 to 10.42.73.255:
DES-3200-28:4# config access_profile profile_id 1 add access_id 1 ip source_ip 10.42.73.1
port 7 deny
Command: config access_profile profile_id 1 add access_id 1 ip source_ip 10.42.73.1 port 7
deny
Success.
DES-3200-28:4#
show access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the currently configured access profiles on the Switch:
specified for all access profiles.
Used to display the currently configured access profiles on the Switch.
show access_profile {profile_id <value 1-512>}
This command is used to display the currently configured access profiles.
profile_id <value 1-512> – Specify the profile id to display only the access rules
configuration for a single profile ID. The user may enter a profile ID number
between 1 and 512.
None.
218