D-Link xStack DES-3200 Series Reference Manual page 272

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
config authen application
Restrictions
Example usage:
To configure the default method list for the Web interface:
DES-3200-28:4#config authen application http login default
Command: config authen application http login default
Success.
DES-3200-28:4#
show authen application
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the login and enable method list for all applications on the Switch:
DES-3200-28:4#show authen application
Command: show authen application
Application
-------------
Console
Telnet
SSH
HTTP
DES-3200-28:4#
create authen server_host
Purpose
Syntax
Description
Only Administrator-level users can issue this command.
Used to display authentication methods for the various applications
on the Switch.
show authen application
This command is used to display all of the authentication method lists
(login, enable administrator privileges) for Switch configuration
applications (console, telnet, SSH, Web) currently configured on the
Switch.
None.
None.
Login Method List
------------------
default
Zira
default
default
Used to create an authentication server host.
create authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ |
radius] {port <int 1-65535> | key [<key_string 254> | none] | timeout <int
1-255> | retransmit < 1-255>}
This command is used to create an authentication server host for the
TACACS/XTACACS/TACACS+/RADIUS security protocols on the Switch.
When a user attempts to access the Switch with authentication protocol
enabled, the Switch will send authentication packets to a remote
Enable Method List
---------------------
default
default
default
default
267