D-Link xStack DES-3200 Series Reference Manual page 397

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Example usage
To enable address binding DHCP snooping:
DES-3200-28:4#enable address_binding dhcp_snoop
Command: enable address_binding dhcp_snoop
Success.
DES-3200-28:4#
disable address_binding dhcp_snoop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To disable address binding DHCP snooping:
DES-3200-28:4#disable address_binding dhcp_snoop
Command: disable address_binding dhcp_snoop
Success.
DES-3200-28:4#
clear address_binding dhcp_snoop binding_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To clear address binding DHCP snooping binding entries for ports 1 to 3:
DES-3200-28:4#clear address_binding dhcp_snoop binding_entry ports 1-3
Command: clear address_binding dhcp_snoop binding_entry ports 1-3
Success.
DES-3200-28:4#
Used to disable the address binding auto mode.
disable address_binding dhcp_snoop
This command is used to disable the function which allows entries to be
created by the DHCP packet. When the DHCP snooping function is
disabled, all of the auto-learned binding entries will be removed.
None.
Only Administrator-level users can issue this command.
Used to clear the address binding entries learned for the specified ports.
clear address_binding dhcp_snoop binding_entry ports [<portlist> | all]
This command is used to clear the address binding entries learned for
the specified ports.
ports - Specifies the list of ports that you would like to clear the dhcp-
snoop learned entry.
Only Administrator-level users can issue this command.
392