D-Link xStack DES-3200 Series Reference Manual page 488

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
show ethernet_oam ports (event log)
Purpose Used to display Ethernet OAM event log
show ethernet_oam { <portlist>} event_log { index <value_list>}
Syntax
Description Use this command to view ports Ethernet OAM event log information. The Switch can buffer
1000 event logs. The event log is different from sys-log. It provides more detailed information
than sys-log. Each OAM event will be recorded in both OAM event log and syslog. Specify an
index to show a range of events.
Parameters <portlist> - Specifies a range of ports to display event logs. Use all to specify all ports.
index - Specifies an index range to display.
Restrictions None.
Example usage:
To show port 1 OAM event:
DES-3200-28F:4# show ethernet_oam ports 1 event_log
Commands: show ethernet_oam ports 1 event_log
Port 1
--------------------------------------
Event Listing
Index Type
----- ----------------
1 Error Symbol
Value: 3,
2 Error Frame Seconds Remote
Value: 5,window: 1000, threshold: 3, Accumulated errors: 10
3 Dying Gasp
Local Event Statistics
Error Symbol Event
Error Frame Event
Error Frame Period Event
Errored Frame Seconds Event
Dying Gasp
Critical Event
Remote Event Statistics
Error Symbol Event
Error Frame Event
Error Frame Period Event
Errored Frame Seconds Event
Dying Gasp
Critical Event
DES-3200-28F:4#
Location
-------------
Local
window: 30000ms, threshold: 3, Accumulated errors: 10
Remote
: 1
: 1
: 0
: 0
: 0
: 0
: 1
: 1
: 0
: 0
: 1
: 0
Time Stamp
----------------------------------
2008-4-18 10:30
2008-4-18 10:35
2008-4-18 10:35
483