D-Link xStack DES-3200 Series Reference Manual page 125

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Example usage:
To display the multicast MAC address table:
DES-3200-28:4#show multicast_fdb vlan default
Command: show multicast_fdb vlan default
VLAN Name
MAC Address
Egress Ports
Mode
Total Entries
DES-3200-28:4#
show fdb
Purpose
Syntax
Description
Parameters
Restrictions
: default
: 01-00-5E-00-00-00
: 1-5
: Static
: 1
Used to display the current unicast MAC address forwarding database.
show fdb {port <port> | vlan <vlan_name 32> | vlandid <vidlist> |
mac_address <macaddr> | static | aging_time}
This command is used to display the current contents of the Switch's
forwarding database.
port <port>  The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified device
through this port.
<vlan_name 32>  The name of the VLAN on which the MAC address
resides.
<vidlist>  Displays the entries for the VLANs indicated by VID list.
<macaddr>  The MAC address that is present in the forwarding
database table.
static  Displays the static MAC address entries.
aging_time  Displays the aging time for the MAC address forwarding
database.
None.
120