D-Link xStack DES-3200 Series Reference Manual page 434

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
show authorization
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example displays authorization status:
DES-3200-28F:4# show authorization
Command: show authorization
Authorization for Attributes: Enabled
DES-3200-28F:4#
config mac_based_access_control trap state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable trap state of MAC-based Access Control:
DES-3200-28F:4# config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DES-3200-28F:4#
Used to display authorization for attributes status.
show authorization
Used this to view authorization for attributes status.
None.
None.
Used to enable or disable sending of MAC-based Access Control traps.
config mac_based_access_control trap state
When MAC-based Access Control trap state is enabled, The trap of MAC-based
Access Control will be sent out.
If the MAC-based Access Control trap state is disabled, no trap will be sent out.
enable – To enable sending MAC-based Access Control traps.
disable – To disable sending MAC-based Access Control traps.
Only Administrator-level users can issue this command.
[enable | disable]
429