D-Link xStack DES-3200 Series Reference Manual page 528

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
In the "Password Recovery Mode" only the following commands can be used.
Command
reset config
reboot
reset account
reset password
{<username>}
show account
Parameters
The reset config command resets the whole configuration will be
back to the default value
The reboot command exits the Reset Password Recovery Mode and
restarts the switch. A confirmation message will be displayed to allow
the user to save the current settings.
The reset account command deletes all the previously created
accounts.
The reset password command resets the password of the specified
user. If a username is not specified, the password of all users will be
reset.
The show account command displays all previously created
accounts.
523