D-Link xStack DES-3200 Series Reference Manual page 210

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
show auth_client
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current RADIUS authentication client:
DES-3200-28F:4#show auth_client
Command: show auth_client
radiusAuthClient ==>
radiusAuthClientInvalidServerAddresses
radiusAuthClientIdentifier
radiusAuthServerEntry ==>
radiusAuthServerIndex
radiusAuthServerAddress
radiusAuthClientServerPortNumber
radiusAuthClientRoundTripTime
radiusAuthClientAccessRequests
radiusAuthClientAccessRetransmissions
radiusAuthClientAccessAccepts
radiusAuthClientAccessRejects
radiusAuthClientAccessChallenges
radiusAuthClientMalformedAccessResponses
radiusAuthClientBadAuthenticators
radiusAuthClientPendingRequests
radiusAuthClientTimeouts
radiusAuthClientUnknownTypes
radiusAuthClientPacketsDropped
CTRL+C ESC q Quit
Used to display the current RADIUS authentication client.
show auth_client
This command is used to display the current RADIUS
authentication client currently configured on the Switch.
None.
None.
SPACE n Next Page ENTER
0
D-Link
:1
0.0.0.0
0
0
0
0
0
0
0
0
0
0
0
0
0
Next Entry a All
205