Pppoe Circuit Id Insertion Commands - D-Link xStack DES-3200 Series Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
PPPoE Circuit ID Insertion is used to produce the unique subscriber mapping capability that is possible on ATM networks
between ATM-DSL local loop and the PPPoE server. The PPPoE server will use the inserted Circuit Identifier sub-tag of the
received packet to provide AAA services (Authentication, Authorization and Accounting). Through this method, Ethernet
networks can be as the alternative of the ATM networks.
The PPPoE Circuit ID Insertion commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table:
Command
config pppoe circuit_id_insertion
config pppoe circuit_id_insertion ports
show pppoe circuit_id_insertion
show pppoe circuit_id_insertion ports
Each command is listed, in detail, in the following sections:
PPP E C
O IRCUIT
Parameters
state [ enable | disable ]
<portlist> { circuit_id [ mac | ip | udf <string 32> ] | state [enable |
disable ] } (1)
{<portlist>}
511
ID I
NSERTION
61
C
OMMANDS