D-Link xStack DES-3200 Series Reference Manual page 403
Layer 2 managed ethernet switch
Hide thumbs
Also See for xStack DES-3200 Series:
- Reference manual (647 pages) ,
- Installation manual (68 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
enable loopdetect
Purpose
Used to globally enable the loop-detect function on the Switch.
Syntax
enable loopdetect
Description
This command is used to allow the loop detection function to be globally enabled on the Switch.
The default value is disabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage :
To enable loopback detection on the Switch:
DES-3200-28F:4# enable loopdetect
Command: enable loopdetect
Success.
DES-3200-28F:4#
disable loopdetect
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To disable the loopback detection function on the Switch:
DES-3200-28F:4# disable loopdetect
Command: disable loopdetect
DES-3200-28F:4#
Used to globally disable the loopback detection on the Switch.
disable loopdetect
This command is used to globally disable the loopback detection on the Switch. The
default value is disabled.
None.
Only Administrator-level users can issue this command.
398
Hide quick links:
Advertisement
Table of Contents
