D-Link xStack DES-3200 Series Reference Manual page 54

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
delete snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured SNMP view from the Switch:
DES-3200-28:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-3200-28:4#
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Used to remove an SNMP view entry previously created on the
Switch.
delete snmp view <view_name 32> [all | <oid>]
This command is used to remove an SNMP view previously created
on the Switch.
<view_name 32>  An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
all  Specifies that all of the SNMP views on the Switch will be
deleted.
<oid>  The object ID that identifies an object tree (MIB tree) that
will be deleted from the Switch.
Only Administrator-level users can issue this command.
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
This command is used to display an SNMP view previously created
on the Switch.
<view_name 32>  An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
49