xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Example usage:
To display the currently entered SNMP community strings:
DES-3200-28:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
------------------
private
public
dlink
Total Entries: 3
DES-3200-28:4#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666":
DES-3200-28:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-3200-28:4#
View Name
-------------------
CommunityView
CommunityView
ReadView
Used to configure an identifier for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID 10-64>
This command is used to configure an identifier for the SNMP
engine on the Switch.
<snmp_engineID 10-64> An alphanumeric string that will be used
to identify the SNMP engine on the Switch.
Only Administrator-level users can issue this command.
52
Access Right
------------
read_write
read_only
read_write