D-Link xStack DES-3200 Series Reference Manual page 509

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Example usage:
To display current ERPS information:
DES-3200-28F:4# show erps
Command: show erps
ERPS Information
---------------------------
ERPS Status
R-APS VLAN
West Port
East Port
RPL Port
Owner
Protection VLANs
Ring MEL
Holdoff Time
Guard Time
WTR Time
Log
Trap
Current Ring State
DES-3200-28F:4#
config erps trap
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable ERPS traps:
DES-3200-28F:4# config erps trap enable
Command: config erps trap enable
Success.
DES-3200-28F:4#
: Enabled
: 8
: 25 (Blocking)
: 26 (Forwarding)
: West Port
: Enabled (Active)
: 2
: 1
: 0 ms
: 500 ms
: 5 minutes
: Disabled
: Disabled
: Protection
Used to configure the trap status for ERPS.
config erps trap [ enable | disable ]
This command is used to enable or disable the trap state for ERPS events.
enable | disable – Use to define the status of ERPS traps. ERPS traps are disabled
by default.
Only Administrator-level users can issue this command.
504