D-Link xStack DES-3200 Series Reference Manual page 166

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
show lacp_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display LACP port mode settings:
DES-3200-28:4#show lacp_ports 1-10
Command: show lacp_ports 1-10
Port
------
1
2
3
4
5
6
7
8
9
10
DES-3200-28:4#
Used to display current LACP port mode settings.
show lacp_ports {<portlist>}
This command is used to display the LACP mode settings as they are
currently configured.
<portlist>  Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
None.
Activity
--------
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
161