D-Link xStack DES-3200 Series Reference Manual page 99

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Example usage:
To configure a syslog host:
DES-3200-28:4#config syslog host 1 severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-3200-28:4#
To configure a syslog host for all hosts:
DES-3200-28:4#config syslog host all severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-3200-28:4#
delete syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured syslog host:
DES-3200-28:4#delete syslog host 4
Command: delete syslog host 4
Success.
DES-3200-28:4#
Used to remove a syslog host that has been previously configured,
from the Switch.
delete syslog host [<index 1-4> | all]
This command is used to remove a syslog host that has been
previously configured from the Switch.
<index 1-4>  Specifies that the command will be applied to an index
of hosts. There are four available indexes, numbered 1 through 4.
all  Specifies that the command will be applied to all hosts.
Only Administrator-level users can issue this command.
94