D-Link xStack DES-3200 Series Reference Manual page 49

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Command
create snmp
delete snmp
show snmp host
create trusted_host
delete trusted_host
show trusted_host
enable snmp
disable snmp
disable snmp linkchange_traps
enable snmp linkchange_traps
config snmp linkchange_traps
ports
show snmp traps
config snmp system_contact
config snmp system_location
config snmp system_name
enable rmon
disable rmon
Each command is listed, in detail, in the following sections:
Parameters
[host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
<auth_string 32>
[host <ipaddr>]
{<ipaddr>}
[<ipaddr> | network<network_address>]
[ipaddr<ipaddr> | network<network_address> | all]
[authenticate_traps | linkchange_traps | traps]
[authenticate_traps | linkchange_traps | traps]
[all | <portlist>] [enable | disable]
{linkchange_traps { ports <portlist>} }
{<sw_contact>}
{<sw_location>}
{<sw_name>}
44