Basic Switch Commands - D-Link xStack DES-3200 Series Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
The Basic Switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
enable password encryption
disable password encryption
create account
config account
show account
delete account
show session
show switch
show serial_port
config serial_port
enable clipaging
disable clipaging
enable telnet
disable telnet
telnet
enable web
disable web
save
reboot
reset
login
logout
show config
config terminal_line
show terminal_line
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
Each command is listed, in detail, in the following sections:
Parameters
[admin | user] <username 15>
<username> {encrypt [plain_text|sha_1] <password>}
<username>
{baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]} (1)
{<tcp_port_number 1-65535>}
<ipaddr> {tcp_port <value 0-65535>}
{<tcp_port_number 1-65535>}
{ [config | log | all]}
{force_agree}
{[config | system ]} { force_agree}
[current_config | config_in_nvram]
[default | <value 20-80>]
10
B S
ASIC WITCH
4
C
OMMANDS