xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
config terminal_line
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the terminal line to display 30 rows:
DES-3200-28:4#config terminal_line 30
Command: config terminal_line 30
Success.
DES-3200-28:4#
show terminal_line
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the current number of rows that can be displayed:
DES-3200-28:4#show terminal_line
Command: show terminal_line
Terminal Line : 24 (Default)
DES-3200-28:4#
Used to configure the number of rows which can be displayed on a
screen.
config terminal_line [ default | <value 20-80>]
This command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
None.
Only Administrator-level users can issue this command.
Used to show the number of rows which can be displayed on the
screen.
show terminal_line
This command is used to show the number of rows which can be
displayed on the screen.
None.
None.
27