xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
config mac_based_access_control max_users
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To configure the MAC-based access control maximum number of users:
DES-3200-28:4#config mac_based_access_control max_users 128
Command: config mac_based_access_control max_users 128
Success.
DES-3200-28:4#
Used to configure the maximum number of authorized clients.
config mac_based_access_control max_users [no_limit | <value 1-
128>]
This command is used to specify the maximum user limit per counter.
no_limit – Specify to not limit the system maximum user number.
<value 1-128> – Specify to set the maximum number of authorized
clients on the whole device.
Only Administrator-level users can issue this command.
426