Technical Support Commands - D-Link xStack DES-3200 Series Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
show tech_support
upload
tech_support_toTFTP
Each command is listed, in detail, in the following sections:
show tech_support
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display technical support information on the Switch:
T
Parameters
<ipaddr> <path_filename 64>
Used to show the information for technical support.
show tech_support
This command is especially used by the technical support personnel to
dump the device's overall operation information. The information is
project dependent and includes the following information.
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Layer 3 information
Application
OS status
None.
Only Administrator-level users can issue this command.
S
ECHNICAL UPPORT
434
53
C
OMMANDS