D-Link xStack DES-3200 Series Reference Manual page 262

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Command
enable admin
config admin local_enable
Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the system access authentication policy:
DES-3200-28:4#enable authen_policy
Command: enable authen_policy
Success.
DES-3200-28:4#
disable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the system access authentication policy:
DES-3200-28:4#disable authen_policy
Command: disable authen_policy
Success.
DES-3200-28:4#
Parameters
Used to enable system access authentication policy.
enable authen_policy
This command is used to enable an administrator-defined
authentication policy for users trying to access the Switch. When
enabled, the device will check the method list and choose a technique
for user authentication upon login.
None.
Only Administrator-level users can issue this command.
Used to disable system access authentication policy.
disable authen_policy
This command is used to disable the administrator-defined
authentication policy for users trying to access the Switch. When
disabled, the Switch will access the local user account database for
username and password verification. In addition, the Switch will now
accept the local enable password as the authentication for normal users
attempting to access administrator level privileges.
None.
Only Administrator-level users can issue this command.
257