D-Link xStack DES-3200 Series Reference Manual page 430

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
To display MAC-based access control local databases by VLAN:
DES-3200-28:4#show mac_based_access_control_local vlan default
Command: show mac_based_access_control_local vlan default
MAC Address
-----------------
00-00-00-00-00-01
00-00-00-00-00-04
Total Entries: 2
DES-3200-28:4#
show mac_based_access_control auth_state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
MAC 00-00-00-00-00-01 is authenticated without a VLAN assigned (the specified target VLAN might not exist or a target VLAN
has not been specified). The ID of RX VLAN will be displayed (the RX VLAN ID is 4004 in this example).
MAC 00-00-00-00-00-02 is authenticated with a target VLAN assigned. The ID of the target VLAN will be displayed (target
VLAN ID is 1234 in this example).
MAC 00-00-00-00-00-03 failed to pass authentication, and packets with SA 00-00-00-00-00-03 will be dropped no matter which
VLAN these packets are from.
To display the MAC-based access control authentication state:
DES-3200-28:4#show mac_based_access_control auth_state
Command: show mac_based_access_control auth_state
(P):Port based
Port MAC Address
----- -----------------
1 00-00-00-00-00-01
2 00-00-00-00-00-02
3 00-00-00-00-00-03
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
VLAN Name
----------------------
default
default
Used to display the MAC-based access control authentication state.
show mac_based_access_control auth_state {ports <portlist>}
This command is used to display the MAC-based access control authentication state.
ports – Display authentication status by port.
None.
Auth State
--------------
Authenticated
Authenticated
Blocked
VID
------
1
1
VID Priority Aging Time/Hold Time
---- -------- -----------
4004 3 Infinite
1234 - Infinite
1 -
425
60