D-Link xStack DES-3200 Series Reference Manual page 412

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
show port dot1v
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display protocol VLAN information for ports 1 to 2:
DES-3200-28:4# show port dot1v ports 1-2
Command: show port dot1v ports 1-2
Port: 1
Protocol Group ID
-------------------
3
4
5
Port: 2
Protocol Group ID
-------------------
3
4
5
Total Entries: 6
DES-3200-28:4#
Used to display the VLAN to be associated with untagged packets
ingressed from a port based on the protocol group.
show port dot1v {ports <portlist> }
This command is used to display the VLAN to be associated with
untagged packets ingressed from a port based on the protocol group.
portlist – Specifies a range of ports to be displayed.
If not specified, information for all ports will be displayed.
None.
VLAN Name
---------------------------------
default
VLAN300
marketing-1
VLAN Name
---------------------------------
default
VLAN300
marketing-1
Protocol Priority
-----------------
Protocol Priority
-----------------
407
-
-
-
-
-
-