D-Link xStack DES-3200 Series Reference Manual page 371

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
DES-3200-28:4# config lldp forward_ message
Command: config lldp forward_ message
Success.
DES-3200-28:4#
show lldp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display the LLDP system level configuration status:
DES-3200-28:4# show lldp
Command: show lldp
LLDP system information
Chassis Id Subtype
Chassis Id
System Name
System Description
System Capabilities
LLDP Configurations
LLDP Status
LLDP Forward Status
Message Tx Interval
Message Tx Hold Muliplier : 4
ReInit delay
Tx Delay
Notification Interval
DES-3200-28:4#
show lldp mgt_addr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
This command displays the Switch's general LLDP configuration status.
show lldp
This command is used to display the Switch's general LLDP
configuration status.
None.
None.
: MAC Address
: 00-15-E9-41-5A-A7
: D-Link
: Fast Ethernet Switch
: Repeater, Bridge,
: Disable
: Disable
: 30
: 2
: 2
: 5
Used to display the LLDP management address information.
show lldp mgt_addr {ipv4 <ipaddr>}
This command is used to display LLDP management address
information.
ipv4 - IP address of IPV4.
None.
enable
enable
366