D-Link xStack DES-3200 Series Reference Manual page 311

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
The maximum attempts for delivering mail to recipients is three. Mail message delivery attempts will be tried every five minutes
until the maximum number of attempts is reached. Once reached and the message has not been successfully delivered, the
message will be dropped and not received by the mail recipient.
If the Switch shuts down or reboots, mail messages in the waiting queue will be lost.
The SMTP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table:
Command
enable smtp
disable smtp
config smtp
show smtp
smtp send_testmsg
Each command is listed, in detail, in the following sections:
enable smtp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SMTP on the Switch:
DES-3200-28:4#enable smtp
Command: enable smtp
Success.
DES-3200-28:4#
disable smtp
Purpose
Syntax
Description
Parameters
Restrictions
Parameters
{server <ipaddr> | server_port <tcp_port_number 1-65535> |
self_mail_addr <mail_addr 64> | [add mail_receiver <mail_addr
64> | delete mail_receiver <index 1-8>]} (1)
Used to enable the Switch as a SMTP client.
enable smtp
This command, in conjunction with the disable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
None.
Only Administrator-level users can issue this command.
Used to disable the Switch as a SMTP client.
disable smtp
This command, in conjunction with the enable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
None.
Only Administrator-level users can issue this command.
306