D-Link xStack DES-3200 Series Reference Manual page 265

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
config authen_login
Restrictions
Example usage:
To configure the user defined method list "Zira" with authentication methods TACACS, XTACACS and local, in that order.
DES-3200-28:4#config authen_login method_list_name Zira method tacacs xtacacs
local
Command: config authen_login method_list_name Zira method tacacs xtacacs local
Success.
DES-3200-28:4#
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DES-3200-28:4#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DES-3200-28:4#
delete authen_login method_list_name
Purpose
Syntax
the Switch.
method_list_name – Enter a previously implemented method list name
defined by the user. The user may add one, or a combination of up to
four of the following authentication methods to this method list:
tacacs – Adding this parameter will require the user to be authenticated
using the TACACS protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated
using the XTACACS protocol from a remote XTACACS server.
tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS+ protocol from a remote TACACS+
server.
radius  Adding this parameter will require the user to be authenticated
using the RADIUS protocol from a remote RADIUS server.
server_group <string 15>  Adding this parameter will require the user
to be authenticated using a user-defined server group previously
configured on the Switch.
local  Adding this parameter will require the user to be authenticated
using the local user account database on the Switch.
none – Adding this parameter will require no authentication to access
t he Switch.
NOTE: Entering none or local as an authentication protocol
will override any other authentication that follows it on a
method list or on the default method list.
Only Administrator-level users can issue this command.
Used to delete a previously configured user defined method list of
authentication methods for users logging on to the Switch.
delete authen_login method_list_name <string 15>
260