D-Link xStack DES-3200 Series Reference Manual page 134

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
show bandwidth_control
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display bandwidth control settings:
DES-3200-28:4#show bandwidth_control 1-5
Command: show bandwidth_control 1-5
Bandwidth Control Table
Port RX Rate
(Kbit/sec)
---- ----------
1 no_limit
2 no_limit
3 no_limit
4 no_limit
5 no_limit
DES-3200-28:4#
Used to display the bandwidth control table.
show bandwidth_control {<portlist>}
This command is used to display the current bandwidth control
configuration on the Switch, on a port-by-port basis.
<portlist>  Specifies a port or range of ports to be viewed.
None.
TX Rate Effective RX
(Kbit/sec) (Kbit/sec)
---------- ----------------
no_limit no_limit
no_limit no_limit
no_limit no_limit
no_limit no_limit
no_limit no_limit
129
Effective TX
(Kbit/sec)
-------------
no_limit
no_limit
no_limit
no_limit
no_limit